UV flatbed printerIn printing, due to improper operation, it is easy to cause ink flying, which will damage the beauty of our products and reduce product quality. So how should we operate correctly in daily operation to prevent ink flying?

1. UV flatbed printers understand the reasons for ink splashing:

The phenomenon of ink flying in general flatbed printers is generally because the vertical distance between the nozzle and the product is far. Since the ink droplets ejected from the nozzle move in a curve instead of falling vertically under the action of the outside world, the landing point of the ink droplets is not at the original determined position. The higher the distance between the nozzle and the product, the greater the probability of this phenomenon. Therefore, this is why we often say that the distance between the nozzle and the product is moderate. In addition, the phenomenon of ink flying will also occur if the printing curve is not correct.

2. Solutions to the problem of ink flying. UV flatbed printer

After discovering the cause of the problem, it is easier and simpler to prescribe the right medicine. First of all, if the ink flying is caused by the distance between the nozzle and the product being too high, it can be solved by adjusting the distance between the nozzle and the product. The distance between the nozzle and the product is about 3 to 5 mm. If the ink flying is caused by the curve problem, it will be difficult for professional technicians to repair it, but the probability of ink flying caused by the curve is extremely low.